When IPv4 addressing is manually configured on a web server, which property of the IPv4 configuration identifies the network and host portion for an IPv4 address?

Question

Paddington

Computers & Technology

24 June, 21:25

When IPv4 addressing is manually configured on a web server, which property of the IPv4 configuration identifies the network and host portion for an IPv4 address?

+2

Answers (1)

Know the Answer?

Justice Vincent · Answer 1

subnet mask

Explanation:

A subnetwork or subnet mask is a logical subdivision of an IP network.

To find out your subnet mask, the simlest way around it is to is to run a simple command line in windows.

Simply press the Windows key and "R" at the same time to open the command prompt and type "cmd" followed by "enter." This will allow you to see your subnet mask.

In IPv4, the subnet mask 255.255. 255.0 is 32 bits and consists of four 8-bit octets. The address: 10.10. 10.0 subnet mask 255.255.255.0 this simply indicated that the subnet mask consists of a range of IP addresses from 10.10.10.0 - 10.10.10.255.

Subnet masks (IPv4) are often involved in identifying the range of IP addresses that make up a subnet, it can also be described as a group of IP addresses on the same network.