Cylinder cushions at the ends of the cylinder speeds the piston up at the end of the stroke. a) - True b) False

The pads are 200mm long, 150 mm wide and thickness equal to 12mm. 1 - Determine the average shear strain in the rubber if the force P = 15 kN and the shear modulus for the rubber is G = 830 kPa.

3. Determine the expected failure rates, f, and mean time between failures (MTBF), 1/f, for control systems with SIL1, SIL2, and SIL3 ratings with PFDs of 10-2, 10-3, and 10-4, respectively.

As shown, a load of mass 10 kg is situated on a piston of diameter D1 = 140 mm. The piston rides on a reservoir of oil of depth h1 = 42 mm and specific gravity S = 0.8.

Pouring molten aluminum into a mold and allowing it to cool forms?

Different types of steels contain different elements that alter the characteristics of the steel. For each of the following elements, explain what the element does when alloyed with steel.

Given an unsorted array of distinct positive integers A[1 ... n] in the range between 1 and 10000 and an integer i in the same range. Here n can be arbitrary large. You want to find out whether there are 2 elements of the array that add up to i.

A hydraulic power unit is sometimes referred to as a?

8.21 In the final stages of production, a pharmaceutical is sterilized by heating it from 25 to 75°C as it moves at 0.2 m/s through a straight thin-walled stainless steel tube of 12.7-mm diameter.

Which of the following can improve your car's gas mileage? A. Equipment racks B. Cargo carriers C. Sports team flags D. Car aerodynamics

Which of the following describes a logic bomb? a rogue piece of code in a system activates on a certain date a piece of code replaces the boot instructions the cookie tracker is exploited to note your browsing habits a piece of code hidden in a