Different between boring and turning?

Suppose a steam locomotive is rated at 7500 horsepower. If its efficiency is 6%, how much wood must be burned in a 3-hour trip? 1 hp = 750 W. Wood has an energy density of 20.0 MJ / kg.

An undeformed specimen of some alloy has an average grain diameter of 0.04 mm. You are asked to reduce its average grain diameter to 0.010 mm. Is it possible? If so, explain the procedure you would use to and the name the processes involved.

Which of the following is not an oxidizer? a) - H2O2 b) - CH c) - N2O4 d) - LO2

The flow rate of liquid metal into the downsprue of a mold is 500 cm3/s. The cross-sectional area at the top of the sprue is 8 cm2, and the height of the sprue is 15 cm.

If ceramic vessels are typed together based as they were all used as storage containers, in spite of the fact that design elements indicate they are from different time periods, then they have to be functional typeoperational typesystematic type

List and briefly describe two modern's materials needs

Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.

How are fluids distributed and transported in a fluid power system?

The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.

Two parallel Rivers (A and B) are separated by confined and unconfined aquifer estimate the RATE of seepage of river A to River B per unit length of the rivers