Ask Question
EngineeringEngineering
12 May, 12:53

The ASTMD638 is the perfect test to get quick properties to use in mechanical design of plastic parts. a) True b) - False

+5
Answers (1)
  1. 12 May, 13:21
    0
    Answer: True

    Explanation:

    The ASTMD638 is the standard property for determining the tensile nature in the plastic parts and materials. It can be also used for testing the material thickness approximately 14mm.

    ASTMD638 is the test method and it also determine the poisson's ratio. This method are also use to control the specification of the plastic materials.

    ASTM stand for american society for testing and material and it include the specification of tensile strength and module.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “The ASTMD638 is the perfect test to get quick properties to use in mechanical design of plastic parts. a) True b) - False ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
If poles are more than zeros in G (S), then number of root locus branches is equal to a) Number of poles b) Number of zeros c) Sum of poles and zeros d) Difference of poles and zeros
Answers (1)
Describe the process of setting and strength gain in portland cement systems. Begin with raw cement and describe what happens over time, which hydrates form first, and the rate at which the various hydrates form.
Answers (1)
How high does receptacles have to be in a house
Answers (1)
Base course aggregate has a target dry density of 119.7 lb/cu ft in place. It will be laid down and compacted in a rectangular street repair area of 2000 ft * 48 ft * 6 in. The aggregate in the stockpile contains 3.1% moisture.
Answers (1)
Select the characteristics of an ideal operational amplifier. 1 / Zero gain for the common-mode input signal. 2 / Zero bandwidth 3 / Infinite gain for the differential input signal. 4 / Zero output impedance.
Answers (1)
New Questions in Engineering
The Reynolds number, rhoVD/μ is a very important parameter in fluid mechanics. Determine its value for ethyl alcohol flowing at a velocity of 4 m/s through a 2-in.-diameter pipe.
Answers (1)
Work done by a system during a process can be considered as a property of the system. a) True b) False
Answers (1)
When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.
Answers (2)
hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.
Answers (1)
10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both
Answers (2)
Home » Engineering » The ASTMD638 is the perfect test to get quick properties to use in mechanical design of plastic parts. a) True b) - False
Sign Up Forgot Password?