River models are used to study many different types of flow situations. A certain small river has an average width and depth of 65 ft and 7 ft, respectively, and carries water at a flow rate of 775 ft3 / s. A model is to be designed based on Froude number similarity so that the discharge scale is 250. At what width and flowrate would the model operate?
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “River models are used to study many different types of flow situations. A certain small river has an average width and depth of 65 ft and 7 ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Explain polygon law of vector. Derive an expression for resultant vector
Answers (1)
Martensitic transformations only occur in the Fe-C system. ___ Certain materials can age harden at room temperature. ___ Pure metals can be age hardened. ___ Tempering of martensitic steel increases its ductility.
Answers (1)
A rigid tank having 21.225 m^3 volume contains air having density of 1.829 kg/m^3 Air is supplied to the tank from a high-pressure supply line via a valve connection, until the air density reaches to 5.007 kg/m^3. This procedure has taken 56.
Answers (1)
The number of vacancies present in some metal at 757°C is 1.7 * 1024 m-3. Calculate the number of vacancies at 470°C given that the energy for vacancy formation is 1.17 eV/atom; assume that the density at both temperatures is the same.
Answers (1)
T F 2. A "4" indicates that the weld was made in the vertical position.
Answers (2)
New Questions in Engineering
1. What types of fire can plain water be used on?
Answers (2)
Pressurized steam at 400 K flows through a long, thin-walled pipe of 0.6-m diameter. The pipe is enclosed in a concrete (stone mix) casing that is of square cross section and 1.75 m on a side.
Answers (1)
If traffic is approaching on your left and there is a child riding a bike to your right, you should: A. Move closer to oncoming traffic B. Move closer to the bicyclist C. Pull over until the road is clearer
Answers (1)
Alloy parts were cast with a sand mold that took 160 secs for a cube-shaped casting to solidify. The cube was 50 mm on a side. (a) Determine the value of the Chvorinov's mold constant.
Answers (1)
Critically analyse a common engineered product in terms of the materials used, the processes required to manufacture the product, and the historical context of the material leading to its present form
Answers (1)