Ask Question
EngineeringEngineering
2 July, 02:20

Describe the grain structure of a metal ingot that was produced by slow-cooling the metal in a stationary open mold.

+1
Answers (1)
  1. 2 July, 02:40
    0
    Explained

    Explanation:

    In case case of slow cooling of a metal ingot, the micro structure is more like coarse. At the surface due to high heating rate (surface will to exposed to higher temperature than the inner part and for longer time) the grains are small as grains will get lesser time to cool. Where as we go inside the grains will be gradually elongated. At the center we will find equiaxed grains.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Describe the grain structure of a metal ingot that was produced by slow-cooling the metal in a stationary open mold. ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Now, after all of the ice melts, the sun shines for a while and the water column experiences heating at the surface. Would surface heating increase or decrease the stability of the water column? Explain.
Answers (1)
Define the COP of a heat pump.
Answers (1)
The capacitor can withstand a peak voltage of 600 volts. If the voltage source operates at the resonance frequency, what maximum voltage amplitude VmaxVmaxV_max can the source have if the maximum capacitor voltage is not exceeded?
Answers (2)
Which type of load generates a magnetic field?
Answers (1)
Calibrations on a recent version of an operating system showed that on the client side, there is a delay of at least 0.5 ms for a packet to get from an application to the network interface and a delay of 1.
Answers (1)
New Questions in Engineering
List and briefly describe two modern's materials needs
Answers (1)
Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.
Answers (1)
How are fluids distributed and transported in a fluid power system?
Answers (1)
The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.
Answers (1)
Two parallel Rivers (A and B) are separated by confined and unconfined aquifer estimate the RATE of seepage of river A to River B per unit length of the rivers
Answers (1)
Home » Engineering » Describe the grain structure of a metal ingot that was produced by slow-cooling the metal in a stationary open mold.
Sign Up Forgot Password?