1. What types of fire can plain water be used on?

Describe the steps involved in accomplishing a life-cycle cost analysis (LCCA). I have listed the steps. just describe. a) - Operational Performance. b) - Salvage externalities c) - Value vs.

Given: a variable named incompletes that refers to a list of student ids, and a variable student_id Write some code that counts the number of times the value associated with student_id appears in the list associated with incompletes and assigns this

Gasoline flows through the 2 cm diameter hose in a gas station at a speed of 0.7 m/s. If the gas tank in my car has a capacity of 10.6 gallons (0.

Find the equivalent impedance Zeq seen by the source when Vs = 4 cos (4t) v, C = 0.5 F, R = 1 Ω and L = 0.5 H. (Give angles in degrees and round final answers to two decimal places.) Calculate the voltage across the capacitor.

A water reservoir contains 108 metric tons of water at an average elevation of 84 m. The maximum amount of electric energy that can be generated from this water is: 8 kwh, 16 kwh, 1630 kwh, 16300 kwh or 58800 kwh.

There are six items to be rung up in the cash register. The first item costs $15.00. Each item after that costs an additional $2.00. (item #2 costs $17, item #3 costs $19, etc.

List and briefly describe two modern's materials needs

Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.

How are fluids distributed and transported in a fluid power system?

The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.