Engineering

11 January, 16:49

Water is contained in a rigid vessel of 5 m3 at a quality of 0.8 and a pressure of 1 MPa. If the pressure is reduced to 270.3 kPa by cooling the vessel, find the final quality of the water in the tank and calculate the final mass of vapor and mass of liquid in kg.

+4

Answers (1)

Know the Answer?

Not Sure About the Answer?

Find an answer to your question 👍 “Water is contained in a rigid vessel of 5 m3 at a quality of 0.8 and a pressure of 1 MPa. If the pressure is reduced to 270.3 kPa by ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.

Search for Other Answers

You Might be Interested in

The thermal conductivity of a sheet of rigid, extruded insulation is reported to be k = 0.029 W / m K. The measured temperature difference across a 25-mm-thick sheet of the material is T1 - T2 = 12°C. a.

In your opinion, what is the external opportunity cost of a successful biking company in a community

Turn the motor around in the circuit. What happens?

A specimen has circular cross-sectional area with initial diameter d = 26 mm and a gauge length Lo = 200 mm. A force P = 127 kN elongates the specimen by delta = 3 x 10^-1 mm.

The capacitor can withstand a peak voltage of 600 volts. If the voltage source operates at the resonance frequency, what maximum voltage amplitude VmaxVmaxV_max can the source have if the maximum capacitor voltage is not exceeded?

New Questions in Engineering

The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are95 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 7.2 MPa and thetemperature is 2150 K.

Explain two Types of bearing?

7 Single-use earplugs require a professional fitting before they can be used. A True B) False

Electric power is to be generated by installing a hydraulic turbine-generator at a site 138 m below the free surface of a large water reservoir that can supply water at a rate of 2400 kg/s steadily. Determine the power generation potential.

When the French horn plays with brass instruments, then it is played very softly to match the texture. True/False