Who is responsible for conducting a hazard assessment?

Select the best option.

Employee

Employer

Discuss four (4) advantages of direct and indirect water supply system.

You are reassembling a gearbox. The output shaft on the gearbox connects to a machine. The gearbox converts the motor's RPM and torque to the level needed by the machine. The motor tums to the left. The shaft needs to tum to the right FOR

Technician A says that OBD-II systems include generic as well as vehicle manufacturer's specific diagnostic trouble codes (DTCs) and scan data displays, Technician B says that OBD-II systems have common DTCs. Who is correct? O A. Technician B O B.

Suppose a steam locomotive is rated at 7500 horsepower. If its efficiency is 6%, how much wood must be burned in a 3-hour trip? 1 hp = 750 W. Wood has an energy density of 20.0 MJ / kg.

Convert 0.656 to a fraction

The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are95 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 7.2 MPa and thetemperature is 2150 K.

Explain two Types of bearing?

7 Single-use earplugs require a professional fitting before they can be used. A True B) False

Electric power is to be generated by installing a hydraulic turbine-generator at a site 138 m below the free surface of a large water reservoir that can supply water at a rate of 2400 kg/s steadily. Determine the power generation potential.

When the French horn plays with brass instruments, then it is played very softly to match the texture. True/False