Sign In
Ask Question
William Hartman
Engineering
6 November, 23:34
What is the lehr and what purpose does it serve?
+4
Answers (
1
)
Macie Johnson
6 November, 23:49
0
Step1
Lehr is the long open or closed insulated space for glass manufacturing. Lehr must be large enough to keep the cooling of glass uniform. The function of Lehr is the same as an annealing process in metallurgy.
Step2
Lehr decrease the cooling and temperature variation in glass production. Uneven temperature creates the internal stress in the glass. Lehr reduces the internal stress in the glass product. So, the main purpose of the Lehr is to reduce the internal stress and keep the cooling uniform.
Comment
Complaint
Link
Know the Answer?
Answer
Not Sure About the Answer?
Find an answer to your question 👍
“What is the lehr and what purpose does it serve? ...”
in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
ake a look at the back of a fridge or AC unit. You will see a 'radiator' that is used to remove heat from the R134a fluid that circulates within the refrigeration system.
Answers (1)
The room design cooling load is 3600 Btu/hr. The enthalpy of air leaving the cooling coil is 23 Btu/lbma. The room condition is 75 F db and humidity ratio of 0.01 lbmv/lbma. The air specific volume at 13.5 ft3/lbm.
Answers (1)
What is the smallest variable type I can use to represent the number 27?
Answers (1)
What does the General Duty Clause require employers to do?
Answers (1)
After Hurricane Katrina there was considerable public outrage that many of the properties were not insured against flooding although they were insured against wind damage. What might explain these different approaches to insurance? A.
Answers (2)
New Questions in Engineering
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are95 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 7.2 MPa and thetemperature is 2150 K.
Answers (1)
Explain two Types of bearing?
Answers (1)
7 Single-use earplugs require a professional fitting before they can be used. A True B) False
Answers (2)
Electric power is to be generated by installing a hydraulic turbine-generator at a site 138 m below the free surface of a large water reservoir that can supply water at a rate of 2400 kg/s steadily. Determine the power generation potential.
Answers (1)
When the French horn plays with brass instruments, then it is played very softly to match the texture. True/False
Answers (1)
Home
»
Engineering
» What is the lehr and what purpose does it serve?
Sign In
Sign Up
Forgot Password?