Engineering

15 April, 21:53

Technician A says that after replacing a power steering hose, the system should be flushed, refilled, and bled. Technician B says to replace any O-rings

when installing a new hose. Who is correct?

A. Technician A only

B. Technician B only

C. Both Technician

A and B

D. Neither Technician

A nor B

+1

Answers (1)

Know the Answer?

Not Sure About the Answer?

Find an answer to your question 👍 “Technician A says that after replacing a power steering hose, the system should be flushed, refilled, and bled. Technician B says to ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.

Search for Other Answers

You Might be Interested in

2. What is an important aspect of the American free enterprise system that encourages people to improve their material well-being? (profit motive)

Analysis of the relationship between the fuel economy (mpg) and engine size (in liters) for 35 models of cars produces the regression model ModifyingAbove mpg with caret equals 36.91 minus 3.824 times Engine size mpg=36.91-3.824•Engine size.

A waste stabilization pond is used to treat a dilute municipal wastewater before the liquid is discharged into a river. The inflow to the pond has a flow rate of Q=4,000 m3 / day and a BOD concentration of Cin = 25 mg/L.

What is a robot's work envelope? A. the protective covering around its control system B. the region of space through which its arms can reach C. the set of processes that it can perform D. the region of space it occupies

You are the manager of a firm that produces a product according to the cost function C (qi) = 160 + 58qi - 6qi2 + qi3. Determine the short-run supply function if:

New Questions in Engineering

What is the most important function of any control system?

Why research and development in Maintenance Engineering?

The common-emitter current gains of two transistors are β = 60 and β = 150. Determine the corresponding common-base current gains. (b) The commonbase current gains of two transistors are α = 0.9820 and α = 0.9925.

Steam enters a turbine operating at steady state at 600°F and 200 lbf/in^2 with a velocity of 80 ft/s and leaves as saturated vapor at 5 lbf/in^2 with a velocity of 300 ft/s. The power developed by the turbine is 200 horsepower.

At steady state, a reversible heat pump cycle discharges energy at the rate to a hot reservoir at temperature TH, while receiving energy at the rate from a cold reservoir at temperature TC.