Engineering

9 June, 10:43

A flow of 100 mgd is to be developed from a 190-mi^2 watershed. At the flow line the area's reservoir is estimated to cover 3900 acres. The annual rainfall is 40 in. the annual runoff is 14 in. and the annual evaporation is 49 in.

1. Find the net gain or loss in storage this represents.

2. Calculate the volume of water evaporated in acre * ft and cubic meters.

+2

Answers (1)

Know the Answer?

Not Sure About the Answer?

Find an answer to your question 👍 “A flow of 100 mgd is to be developed from a 190-mi^2 watershed. At the flow line the area's reservoir is estimated to cover 3900 acres. The ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.

Search for Other Answers

You Might be Interested in

When you are forwarding-bias a diode with a digital VOM, the red test lead should be placed on which lead of the diode? a. Anode B. Calthode c. Emitter D. Drain

An inventor claims to have developed an engine that does not use fuel but operates as a power cycle at steady state while receiving energy by heat transfer from the surrounding atmosphere and discharging energy by heat transfer to the surrounding

This size of battery is found in a Hybrid Electric Vehicle (HEV).

The concentration of carbon monoxide (co) in an exhaust gas is 1x10^4 ppmv. what is the concentration in mg/m^3 at 25 and 1 atm

A 10-station assembly machine has an ideal cycle time of 6 sec. The fraction defect rate at each station is 0.005 and a defect always jams the affected station. When a breakdown occurs, it takes 1.

New Questions in Engineering

10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both

What is the definition of diameter pitch?

List two characteristics of computers.

Which of the following elements of the CIA triad refers to maintaining and assuring the accuracy of data over its life-cycle? Confidentiality Integrity Availability Authentication

According to the video, what are some of the effects of the increase in the use of automated tools for Loading Machine Operators? Check all that apply.