Ask Question
EngineeringEngineering
3 January, 21:45

Explain active and passive fire protection system.

+2
Answers (1)
  1. 3 January, 22:03
    0
    Answer:The following are differences that present in the active fire protection system (AFP) and passive fire protection system (PFP) : -

    Passive fire protection system is for the prevention from the smoke and fire whereas active protect system tends to end the fire. PFP does it work more efficiently as compared with AFP, which sometimes fails to achieve the aim. PFP uses equipment and tools such as dampers, fire resistance wall floors etc whereas AFP uses the tools like fire extinguisher, sprinklers etc.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Explain active and passive fire protection system. ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
An undeformed specimen of some alloy has an average grain diameter of 0.04 mm. You are asked to reduce its average grain diameter to 0.010 mm. Is it possible? If so, explain the procedure you would use to and the name the processes involved.
Answers (2)
A food-services company with a 480 V, three-phase service entrance has the following set of loads:  A 7 ton walk-in refrigeration unit:3 COP of 1.2 and 0.
Answers (1)
In class we learned that in order to uniquely identify one of N equally likely symbols, ceiling (〖log〗_2 N) bits of information must be communicated.
Answers (1)
At steady state, a refrigeration cycle operating between hot and cold reservoirs at 300 K and 275 K, respectively, removes energy by heat transfer from the cold reservoir at a rate of 600 kW.
Answers (1)
When 2 cars a and b are next to one another, they are traveling in the same dierection with speeds va and vb, respectively.
Answers (1)
New Questions in Engineering
Work done by a system during a process can be considered as a property of the system. a) True b) False
Answers (1)
When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.
Answers (2)
hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.
Answers (1)
10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both
Answers (2)
What is the definition of diameter pitch?
Answers (1)
Home » Engineering » Explain active and passive fire protection system.
Sign Up Forgot Password?