A cylindrical bar of metal having a diameter of 20.9 mm and a length of 205 mm is deformed elastically in tension with a force of 45200 N. Given that the elastic modulus and Poisson's ratio of the metal are 68.8 GPa and 0.32, respectively, determine the following: (a) The amount by which this specimen will elongate in the direction of the applied stress. (b) The change in diameter of the specimen. Indicate an increase in diameter with a positive number and a decrease with a negative number.
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “A cylindrical bar of metal having a diameter of 20.9 mm and a length of 205 mm is deformed elastically in tension with a force of 45200 N. ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Suppose you must remove an average of 3.9*108J of thermal energy per day to keep your house cool during the summer. Part A If you upgrade from an old air conditioner with a COP of 2.3 to a new air conditioner with a COP of 6.
Answers (1)
While discussing electrical relays: Technician A says that the relay's coil is energized when the circuit's control switch is open. This action connects power to the load circuit.
Answers (2)
If jobs arrive every 15 seconds on average, what is the probability of waiting at most 30 seconds?
Answers (2)
Conductor sizes up through 4/0 AWG are expressed in American Wire Gauge (AWG). Conductor sizes larger than 4/0 AWG are expressed in a. radians b. diameter O c. komil d. metric units
Answers (1)
What is a motor cycle motor made out of
Answers (2)
New Questions in Engineering
Work done by a system during a process can be considered as a property of the system. a) True b) False
Answers (1)
When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.
Answers (2)
hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.
Answers (1)
10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both
Answers (2)
What is the definition of diameter pitch?
Answers (1)