Identify which sound type each line contains.

Describe the common heat treatment for gears and gear teeth.

A liquid refrigerant (sg=1,2) is flowing at a weight flow rate of 20,9 N/h. Refrigerant flashes into a vapor and its specific weight become 11,5 N/m^3. If the weigt flow rate remains at 20,9 N/h, compute the volume flow rate[10^-4 m^3/sec].

The hot combustion gases of a furnace are separated from the ambient air and its surroundings, which are at 25 oC, by a brick wall 0.15 m thick. The brick has a thermalconductivity of 1.2 W/m. K and a surface emissivity of 0.8.

Flat ball flat on the field. what forces are acting upon it?

Tech A says that the MIL can turn off if the fault doesn't reappear in a certain number of tests. Tech B says that when an MIL is activated, the PCM stores the DTC until a predetermined number of drive cycles have been performed or cleared by a scan

Explain two Types of bearing?

7 Single-use earplugs require a professional fitting before they can be used. A True B) False

Electric power is to be generated by installing a hydraulic turbine-generator at a site 138 m below the free surface of a large water reservoir that can supply water at a rate of 2400 kg/s steadily. Determine the power generation potential.

When the French horn plays with brass instruments, then it is played very softly to match the texture. True/False

You're running an engine and seeing that it is exhausting blue smoke. Which is likely to be the problem?