What is the inch equivalent of 1 millimeter

Explain in less than 100 words, how you can obtain the young's modulus of a material using a tensile machine.

How to create a machine that can create anything without any limitations

Joe has a set up in which the length of the load arm is 20cm and the length of the effort arm is 80cm. What is the mechanical advantage of the Jack?

A tensile test is performed on a metal specimen, and it is found that a true plastic strain of 0.22 is produced when a true stress of 572 MPa (82960 psi) is applied; for the same metal, the value of K in the equation is 860 MPa (124700 psi).

The brainstorming process is best done on your own without peer interaction. A. True B. False

The Reynolds number, rhoVD/μ is a very important parameter in fluid mechanics. Determine its value for ethyl alcohol flowing at a velocity of 4 m/s through a 2-in.-diameter pipe.

Work done by a system during a process can be considered as a property of the system. a) True b) False

When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.

hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.

10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both