Demarion Herman

Engineering

11 September, 00:19

A car crusher has one hydraulic input piston with diameter 2 ft and 6 crushing pistons with diameter 10 feet. If this car needs 2,245 psi to crush it, what is the output force being produced to crush this car in-lbs? Round to the nearest Lb.

+4

Answers (1)

Know the Answer?

Not Sure About the Answer?

Find an answer to your question 👍 “A car crusher has one hydraulic input piston with diameter 2 ft and 6 crushing pistons with diameter 10 feet. If this car needs 2,245 psi ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.

Search for Other Answers

You Might be Interested in

While having a discussion about O-rings at the bottom of filters, Technician A says that the Automotive Filter Manufacturers Council recommends that the filter O-ring be lubricated with oil after installing the filter.

Problem 2 (a) A sinusoid with a frequency of 2Hz is applied to a sampler/zero-order hold combination. The sampling rate is 10Hz. List all the frequencies present in the output that are less than 50Hz.

You test the lighting for the first time none of the new lights work, but the old ones do. What should you do first?

Consider a standard room thermostat. Determine the sensor, transducer, output, and control stages for this measurement system.

Calculate the planar area of a rectangular wing with a span of 0.225 m and a chord of 0.045 m.

New Questions in Engineering

The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are95 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 7.2 MPa and thetemperature is 2150 K.

Explain two Types of bearing?

7 Single-use earplugs require a professional fitting before they can be used. A True B) False

Electric power is to be generated by installing a hydraulic turbine-generator at a site 138 m below the free surface of a large water reservoir that can supply water at a rate of 2400 kg/s steadily. Determine the power generation potential.

When the French horn plays with brass instruments, then it is played very softly to match the texture. True/False