Which of the following explains why material properties present challenges for engineers?
A) Very little is known about them.
B) Physical properties are rarely studied in science,
C) They are altered by variables, such as temperature
D) There is no way to tell how a material will respond to pressure
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Which of the following explains why material properties present challenges for engineers? A) Very little is known about them. B) Physical ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Which of the following is part of the highway transportation system (HTS) ? (a) vehicles (c) people (b) roadways (d) all of these
Answers (1)
What is mechanical Advantage in you own words?
Answers (2)
A binary liquid system exhibits LLE at 25°C. Determine from each of the following sets of miscibility data estimates for parameters A12 and A21 in the Margules equation at 25°C: (a) x1 α = 0.10, x1 β = 0.90; (b) x1 α = 0.20, x1 β = 0.
Answers (1)
An aggregate blend is composed of 65% coarse aggregate by weight (Sp. Cr. 2.635), 36% fine aggregate (Sp. Gr. 2.710), and 5% filler (Sp. Cr. 2.748). The compacted specimen contains 6% asphalt binder (Sp. Gr. 1.
Answers (1)
A cylindrical bar of metal having a diameter of 19.7 mm and a length of 206 mm is deformed elastically in tension with a force of 47500 N. Given that the elastic modulus and Poisson's ratio of the metal are 65.1 GPa and 0.
Answers (1)
New Questions in Engineering
List two characteristics of computers.
Answers (1)
Which of the following elements of the CIA triad refers to maintaining and assuring the accuracy of data over its life-cycle? Confidentiality Integrity Availability Authentication
Answers (1)
According to the video, what are some of the effects of the increase in the use of automated tools for Loading Machine Operators? Check all that apply.
Answers (2)
A gas flows through a one-inlet, one-exit control volume operating at steady state. Heat transfer at the rate takes place only at a location on the boundary where the temperature is Tb.
Answers (1)
An uncharged capacitor and a resistor are connected in series to a source of voltage. If the voltage = 7.41 Volts, C = 11.5 µFarad, and R = 89.
Answers (1)