Rubber bushings are used on suspensions to

A. separate parts

B. permit necessary movement

C. cushion parts and reduce vibration and noise

D. All of the above

List the functional units (Instruction memory, Register file, ALU, Data memory) that will be used by the R-Type instruction class: A. Instruction Memory B. Register file C. ALU D.

Is the velocity increasing or decreasing where the flow is developing?

1. Technician A says that an automotive technician must be a "jack-of-all-trades." Technician B says that the technician's job is seldom boring. Who is right? (A) A only. (B) B only. (C) Both A and B. (D) Neither A nor B. onefits of

A 2-kg plastic tank that has a volume of 0.2m^3 is filled with water. Assuming the density of water is 999 kg/m 3; determine the weight of the combined system.

Is refrigerator with an ice-maker an open or a closed system? Explain your answer

The Reynolds number, rhoVD/μ is a very important parameter in fluid mechanics. Determine its value for ethyl alcohol flowing at a velocity of 4 m/s through a 2-in.-diameter pipe.

Work done by a system during a process can be considered as a property of the system. a) True b) False

When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.

hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.

10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both