Sign In
Ask Question
Fattykins
Engineering
21 November, 07:49
How should the front of an enclosed trailer be?
+3
Answers (
2
)
Caitlyn Wood
21 November, 07:55
0
it should be:swept clean, contain rags, not be used for cargo
Comment
Complaint
Link
Alondra Wang
21 November, 08:04
0
Answer:Your cargo should be packed closely and firmly, and tied down to secure it
Explanation:For example, an enclosed cargo trailer should be loaded with 60% of the cargo weight in the front half of the trailer, with the heaviest items loaded in the front. Lighter items should be placed near the top and in the rear of the trailer. Your cargo should be packed closely and firmly, and tied down to secure it.
Comment
Complaint
Link
Know the Answer?
Answer
Not Sure About the Answer?
Find an answer to your question 👍
“How should the front of an enclosed trailer be? ...”
in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
3. Determine the expected failure rates, f, and mean time between failures (MTBF), 1/f, for control systems with SIL1, SIL2, and SIL3 ratings with PFDs of 10-2, 10-3, and 10-4, respectively.
Answers (1)
About ceramics: Can be used for electronic, computer, and aerospace industries. a) True b) - False
Answers (1)
The force on a cutting tool are 2600N vertically downward and 2100 horizontal. Determine the resultant force acting on the tool and the angle at which it acts.
Answers (1)
What is the function maintenance? List some important steps for vibration monitoring based maintenance.
Answers (1)
In casting experiments performed using a certain alloy and type of sand mold, it took 155 sec for a cube-shaped casting to solidify. The cube was 50 mm on a side. (a) Determine the value of the mold constant Cm in Chvorinov's Rule.
Answers (1)
New Questions in Engineering
One kilogram of "as received" yard trimmings is made up of approximately 620 g moisture, 330 g of decomposable organic matter (represented by molar composition C1276H21 280 26Nosa) and 50 g of other non-biodegradable constituents.
Answers (1)
A 5000-lb truck is being used to lift a 1000-lb boulder B that is on a 200-lb pallet A. Knowing that the truck starts from rest and that the horizontal force between the tires and the ground is 700 lb, determine the velocity of the boulder after the
Answers (1)
The fuel mixer in a natural gas burner mixes methane (CH4) with air to form a combustible mixture at the outlet. Determine the mass flow rates at the two inlets needed to produce 0.5 kg/s of an ideal combustion mixture at the outlet.
Answers (1)
A three-phase 25-kVA, 480-V, 60-Hz alternator, operating under balanced steady-state conditions, supplies a line current of 20 A per phase at a 0.8 lagging power factor and at rated voltage. Determine the power triangle for this operating condition.
Answers (1)
Given that the company "Slate Rock and Gravel" has business locations in Granitetown and Bedrock, suppose that the company has been assigned a large block of consecutive IP addresses starting with 192.172.0.
Answers (1)
Home
»
Engineering
» How should the front of an enclosed trailer be?
Sign In
Sign Up
Forgot Password?