Ask Question
EngineeringEngineering
15 February, 10:47

What to do if someone has an electric shock?

+2
Answers (2)
  1. 15 February, 11:06
    0
    Turn off or separate the victim from the electrical source. Unplug or shut off the power source ...

    Call 911 immediately. Even if the person does not appear hurt, they still need medical attention ...

    Apply CPR, if needed ...

    Check for injuries ...

    Inform medical professionals once they arrive.
  2. 15 February, 11:10
    0
    When someone suffers an electrical shock you should follow these steps

    1. Remove person from the source of electricity unless it's not possible at the given time.

    2. Call 911 or local emergency services and inform them of the incident.

    3. Begin CPR if the person shows no signs of circulation such as breathing, coughing or any type of movement

    Extra notes: Try and prevent the persons body temperature from dropping. Referring back to step #1 after moving the person from the electrical source avoid moving them again unless completely necessary.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “What to do if someone has an electric shock? ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Correctly classify the given food items as either a fruit or a vegetable. Drag the foods into the appropriate bins. 1. avocado 2. apple 3. banana 4. potato 5. carrot 6. fruits 7. vegetables
Answers (1)
If you are using your highbeams at night you should remember to do what?
Answers (2)
Another pitfall cited in Section 1.10 is expecting to improve the overall performance of a computer by improving only one aspect of the computer.
Answers (1)
True centrifugal casting is performed horizontally to make copper tube sections The tubes have a length 1.0 m, diameter 0.25 m, and wall thickness = 15 mm.
Answers (1)
1. Research has found that lap/shoulder safety belts, when used, reduce the risk of fatal injury to front-seat passenger car occupants by percent. A. O 25 B. O 35 C. O 45 D. O 55
Answers (2)
New Questions in Engineering
How are fluids distributed and transported in a fluid power system?
Answers (1)
The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.
Answers (1)
Two parallel Rivers (A and B) are separated by confined and unconfined aquifer estimate the RATE of seepage of river A to River B per unit length of the rivers
Answers (1)
What advantage might there be to having the encoder located on the motor side of the gearhead instead of at the output shaft of the gearhead (in other words so that it would rotate at the speed of the armature rather than at the speed of the output
Answers (1)
Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a) - conduction b) - convection c) - radiation d) - conduction and convection
Answers (2)
Home » Engineering » What to do if someone has an electric shock?
Sign Up Forgot Password?