Twenty degree C air enters a tube bank which is to be used to remove 150 [kW] of heat from condensing refrigerant. The refrigerant is flowing inside the tubes of the bank and causes the external tube surfaces to be maintained at 100o C. The air is accelerated by a fan to 8 [m/s] upstream of the bank. The bank is to be constructed of transverse rows of fifty 8 [mm] O. D. tubes 0.75 [m] wide with the center-to-center transverse spacing equal to 15 [mm].
Calculate the exit temperature of the air from the bank
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Twenty degree C air enters a tube bank which is to be used to remove 150 [kW] of heat from condensing refrigerant. The refrigerant is ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Alyssa works for an engineering firm that has been hired to design and supervise the construction of a highway bridge over a major river. The bridge will be a unique design, incorporating complex designs that will likely never be duplicated.
Answers (1)
What affects the size of blind spots?
Answers (1)
Hot water (cph = 4188 J/kg·K) with a mass flow rate of 2.5 kg/s at 100°C enters a thin-walled concentric tube counterflow heat exchanger with a surface area of 23 m2 and an overall heat transfer coefficient of 1000 W/m2 ·K.
Answers (1)
What is the mass of a dragster body with a volume of 150 cm3 if it is made of balsa wood?
Answers (1)
Calculate the percent voids between aggregate particles that have been compacted by rodding, if the dry-rodded unit weight is 88.0 lb/cu ft and the bulk dry specific gravity is 2.701.
Answers (1)
New Questions in Engineering
List and briefly describe two modern's materials needs
Answers (1)
Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.
Answers (1)
How are fluids distributed and transported in a fluid power system?
Answers (1)
The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.
Answers (1)
Two parallel Rivers (A and B) are separated by confined and unconfined aquifer estimate the RATE of seepage of river A to River B per unit length of the rivers
Answers (1)