liquid water enters a cooling tower operating at a steady state 40ºC with a mass flow rate of 105 kg/h. Cooled water at 25ºC exits the cooling tower at the same mass flow rate. Makeup water is supplied at 23ºC. Atmospheric air enters the tower at 30ºC, 1 bar, 35% relative humidity. A saturated moist air stream exits at 34 ºC, 1 bar. Determine a. the mass flow rates of the dry air and makeup water, each in kg/h. b. teh rate of exergy destruction within the cooling tower, in kW, for T0 = 23ºC
Answers (2)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “liquid water enters a cooling tower operating at a steady state 40ºC with a mass flow rate of 105 kg/h. Cooled water at 25ºC exits the ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a) - conduction b) - convection c) - radiation d) - conduction and convection
Answers (2)
A binary liquid system exhibits LLE at 25°C. Determine from each of the following sets of miscibility data estimates for parameters A12 and A21 in the Margules equation at 25°C: (a) x1 α = 0.10, x1 β = 0.90; (b) x1 α = 0.20, x1 β = 0.
Answers (1)
A cylinder with a piston restrained by a linear spring contains 2 kg of carbon dioxide at 500 kPa and 400°C. It is cooled to 40°C and 300 kPa. Calculate the heat transfer for the process.
Answers (1)
Air is compressed in the compressor of a turbojet engine. Air enters the compressor at 270 K and 58 kPa and exits the compressor at 465 K and 350 kPa. Take the average specific heat at constant pressure (cp, avg) of air as 1.015 kJ / kg.
Answers (1)
A. 02 kg of R-134a fills a 0.14-m3 weighted piston-cylinder device at a temperature of - 26.4°C. The container is now heated until the temperature is 100°C. Determine the final volume of R-134a. Use data from the refrigerant tables.
Answers (1)
New Questions in Engineering
Eutectic product in Fe-C system is called A. Pearlite B. Bainite C. Ledeburite D. Spheroidite
Answers (1)
Question 10 Which of the listed components provides the most resistance to wheel rotation on a hybrid during normal braking? OA) Front brakes
Answers (2)
A workpiece is fixed in the lathe between two live centers, one center being in the spindle and another in the tailstock quill. What is used in this situation to transfer the torque from the spindle to the workpiece? a. Collet b. Chuck c.
Answers (2)
Under standard conditions, a given reaction is endergonic (i. e., DG >0). Which of the following can render this reaction favorable: using the product immediately in the next step, maintaining a high starting-material concentration, or keeping a
Answers (1)
There are six items to be rung up in the cash register. The first item costs $15.00. Each item after that costs an additional $2.00. (item #2 costs $17, item #3 costs $19, etc.
Answers (1)