Sign In
Ask Question
Jayden Irwin
Engineering
9 July, 16:58
What are the two types of pumps in compressors?
+4
Answers (
2
)
Andre Roman
9 July, 17:05
0
Answer: The two different types of pumps in compressors are:
1) Centrifugal Pumps
2) Reciprocating Pumps
Explanation:
Compressor is defined as a mechanical device which increases the gas pressure by reducing its volume. The main action of a pump is to transport liquids and pressurize and it coverts rotational energy. As, centrifugal pumps are the most common pumps used for transfer of fluids and it works on simple mechanism.
Reciprocating Pumps is used for low volumes of flow at a high pressure. It is the positive displacement pump. As, it works on the principle of pushing of liquid which executes a reciprocating motion in a closed cylinder.
Comment
Complaint
Link
Jasper Barrett
9 July, 17:17
0
Centrifugal Pumps and Positive Displacement Pumps
Explanation:
The two of pumps listed above is based on the mode of operation. The centrifugal pumps works by increasing the velocity of the liquid through the machine while the displacement pumps works by alternating, filling a cavity and then displace some amount of liquid.
Comment
Complaint
Link
Know the Answer?
Answer
Not Sure About the Answer?
Find an answer to your question 👍
“What are the two types of pumps in compressors? ...”
in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
In an aligned and continuous glass fiber-reinforced nylon 6,6 composite, the fibers are to carry 94 % of a load applied in the longitudinal direction. Modulus of Elasticity [GPa (psi) ] Tensile Strength [MPa (psi) ] Glass fiber 72.5 (10.
Answers (1)
Recall from an earlier lecture that the relationship between the current through an inductor and the voltage across it is given by What is the current through a 10 mH inductor if 1 V is applied across it for exactly 20 ms?
Answers (1)
design a semiconductor resistor with specified resistance to handle a given current denisty a semiconductor at T=300k Nd=5*10^15 cm^-3 acceptors are to be added to form a compensated p type material.
Answers (1)
A waste treatment pond is 50m long and 25m wide, and has an average depth of 2m. The density of the waste is 75.3 lbm/ft3. Calculate the weight of the pond contents in lbf, using a single dimensional equation for your calculation.
Answers (1)
Read "Cybersecurity: Risks, Vulnerabilities and Countermeasures to Prevent Social Engineering Attacks," located within the required readings. In the article, the authors define and discuss social engineering.
Answers (1)
New Questions in Engineering
Air is compressed in the compressor of a turbojet engine. Air enters the compressor at 270 K and 58 kPa and exits the compressor at 465 K and 350 kPa. Take the average specific heat at constant pressure (cp, avg) of air as 1.015 kJ / kg.
Answers (1)
A digital-to-analog converter uses a reference voltage of 120 V dc and has eight binary digit precision. In one of the sampling instants, the data contained in the binary register = 01010101.
Answers (2)
What is a perpetual motion machine of the second kind?
Answers (1)
What happens when you turn a jack
Answers (1)
Disconnecting means shall be capable of being locked in the open position. The provisions for locking do not have to reamin in place. A. True B. False
Answers (1)
Home
»
Engineering
» What are the two types of pumps in compressors?
Sign In
Sign Up
Forgot Password?