What is not required for current to flow through a conductor

What's is the proper fastener to use to join two wires. A. wire nut B. cellophane tape C. Spring clip D. Staples

A simple supported beam at x0 = 0 and xn = L with a uniform load w and the vertical deflection v (x) is described by the boundary value problem d 2 v dx2 = x-L 3EI wx, v (0) = 5, v (L) =

The lid on a pressure vessel is held down with 10 bolts that pass through the lid and a flange on the pressure vessel (similar to example 8-4, in the text). The bolts are secured with nuts under the flange. There are no washers.

A 4.60 L vessel contains 24.5 g of PCl3 and 3.00 g of O2 at 15.0 ⁰C. The vessel is heated to 195 ⁰C, and the contents react to give POCl3.

A waste stabilization pond is used to treat a dilute municipal wastewater before the liquid is discharged into a river. The inflow to the pond has a flow rate of Q=4,000 m3 / day and a BOD concentration of Cin = 25 mg/L.

Equivalent production units are generally determined for a. direct materials only b. direct materials and conversion costs c. direct materials and direct labor costs d. conversion costs only

Befor operating any plant, machinery or equipment, you should

piston cylinder has 5kg water at 500kPa and 300c. Heated by 100V and 4A that operates for 500 secs. It's cooled to a saturated liquid. what is the boundary work and heat lost?

Which statement is true of hydraulic tools? Hydraulic tools: a. Are powered by gasoline. b. Can cause electric shock. c. Use fire resistant fluid. d. Work like a loaded gun.

03-05 / Fig (3) Shows T-Section of dimension 10x10x2cm 10 cm 2 cm 10 cm 2 cm A: Find the location of center of gravity (N. A) of the given T-Section