The following is a list of metals and alloys:
Plain carbon steel Magnesium
Brass Zinc
Gray cast iron Tool steel
Platinum Aluminum
Stainless steel Tungsten
Titanium alloy
1. Select from this list the one metal or alloy that is best suited for each of the following applications, and cite at least one reason for your choice:
a) The block of an internal combustion engine.
b) Condensing heat exchanger for steam.
c) Jet engine turbofan blades.
d) Drill bit.
e) Cryogenic (i. e. very low temperature) container.
f) As a pyrotechnic (i. e. in flares and fireworks).
g) High-temperature furnace elements to be used in oxidizing atmospheres
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “The following is a list of metals and alloys: Plain carbon steel Magnesium Brass Zinc Gray cast iron Tool steel Platinum Aluminum Stainless ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Calculate the reluctance of a 4-meter long toroidal coil made of low-carbon steel with an inner radius of 1.75 cm and an outer radius of 2.25 cm. The permeability of the steel is 2 x 10^-4 Wb/At - m. A) 31.9 x 10^6 At/Wb B) 1.96 x 10^-5 At/Wb C) 4.
Answers (1)
Neon gas enters an insulated mixing chamber at 300 K, 1 bar with a mass flow rate of 1 kg/s. A second steam of carbon monoxide enters at 575 K, 1 bar at a mass flow rate of 0.5 kg/s.
Answers (1)
Two vehicles arrive at an uncontrolled intersection from different streets at the same time 1. The driver on the right must yield to the vehicle on the left 2. The driver on the left must yield to the vehicle on the right 3.
Answers (1)
A walrus loses heat by conduction through its blubber at the rate of 220 W when immersed in - 1.00°C water. Its internal core temperature is 37.0°C, and it has a surface area of 2.23 m2.
Answers (1)
Natural gas containing a mixture of methane, ethane, propane, and butane is burned in a furnace with excess air. (a) One hundred kmol/h of a gas containing 94.4mole% methane, 3.40% ethane, 0.60% propane, and 0.
Answers (1)
New Questions in Engineering
10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both
Answers (2)
What is the definition of diameter pitch?
Answers (1)
List two characteristics of computers.
Answers (1)
Which of the following elements of the CIA triad refers to maintaining and assuring the accuracy of data over its life-cycle? Confidentiality Integrity Availability Authentication
Answers (1)
According to the video, what are some of the effects of the increase in the use of automated tools for Loading Machine Operators? Check all that apply.
Answers (2)