1. A spur gear made of bronze drives a mid steel pinion with angular velocity ratio of 13 / 2 : 1. Thepressure angle is 14 1/2°. It transmits 5 kW at 1800 r. p. m. of pinion. Considering only strength, design the smallest diameter gears and find also necessary face width. The number of teeth should not be less than 15 teeth on either gear. The elastic strength of bronze may be taken as 84 MPa and of steel as 105 MPa. Lewis factor for 14 1/2° pressure angle may be taken as y = 0.6840.124 - No. of teeth.
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “1. A spur gear made of bronze drives a mid steel pinion with angular velocity ratio of 13 / 2 : 1. Thepressure angle is 14 1/2°. It ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
As the temperature of a thermal radiator is increased Group of answer choices the object appears redder. the object appears bluer. the object emits more power for the same area. the object emits less power for the same area.
Answers (1)
Consider five wireless stations A, B, C, D, E. Station A can communicate with all other stations. B can communicate with A, C, E. C can communicate with A, B, D, and D can communicate with A, C, E. Also E can communicate with A, D, B.
Answers (2)
According to the increasing order of toughness, list the following materials. Pearlite, martensite, bainite, spheroidite.
Answers (1)
The fins of a rocket are a part of which subsystem? * O Guidance O Structural O Payload O Propulsion
Answers (1)
You should maintain a __ following distance behind a vehicle you wish to pass.
Answers (1)
New Questions in Engineering
The Reynolds number, rhoVD/μ is a very important parameter in fluid mechanics. Determine its value for ethyl alcohol flowing at a velocity of 4 m/s through a 2-in.-diameter pipe.
Answers (1)
Work done by a system during a process can be considered as a property of the system. a) True b) False
Answers (1)
When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.
Answers (2)
hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.
Answers (1)
10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both
Answers (2)