Ask Question
14 July, 18:53

n a simple electric circuit, Ohm's law states that V=IR, where V is the voltage in Volts, I is the current in Amperes, and R is the resistance in Ohms. Assume that, as the battery wears out, the voltage decreases at 0.02 Volts per second and, as the resistor heats up, the resistance is increasing at 0.04 Ohms per second. When the resistance is 300 Ohms and the current is 0.02 Amperes, at what rate is the current changing?

+2
Answers (2)
  1. 14 July, 19:04
    0
    = - 1.3 x 10⁻⁴ A/s

    Explanation:

    We take the derivative of Ohm's law with respect to time

    V = IR

    Using the product rule:

    dV/dt = I (dR/dt) + R (dI/dt)

    We are given that voltage is decreasing at 0.02 V/s,

    resistance is increasing at 0.04 ohm/s,

    resistance itself is 300 ohms,

    and current is 0.02 A

    Substituting:

    -0.02 V/s = (0.02 A) (0.04 ohm/s) + (300 ohms) (dI/dt)

    dI/dt = - 1.3 x 10⁻⁴ A/s
  2. 14 July, 19:09
    0
    Given Information:

    Rate of change of Voltage = dV/dt = - 0.02 V/s

    Rate of change of Resistance = dR/dt = 0.04 Ω / s

    Resistance = R = 300 Ω

    Current = I = 0.02 A

    Required Information:

    Rate of change of current = dI/dt = ?

    Answer:

    dI/dt = - 6.93x10⁻⁵ A/s

    Explanation:

    The Ohm's law is given by

    V = IR eq. 1

    Where V is the voltage across Resistance R and I is the current flowing through the Resistance R

    Taking derivative of eq. 1 with respect to time t yields

    dV/dt = I*dR/dt + dI/dt*R

    dI/dt*R = - I*dR/dt + dV/dt

    dI/dt = (-I*dR/dt + dV/dt) / R eq. 2

    Now substitute the given values into eq. 2

    dI/dt = (-0.02*0.04 + (-0.02)) / 300

    dI/dt = (-0.0008 - 0.02) / 300

    dI/dt = - 0.0208/300

    dI/dt = - 6.93x10⁻⁵ A/s

    Therefore, the current is decreasing at the rate of 6.93x10⁻⁵ A/s
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “n a simple electric circuit, Ohm's law states that V=IR, where V is the voltage in Volts, I is the current in Amperes, and R is the ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers