The radiator of a steam heating system has a volume of 35 L and is filled with superheated water vapor at 200 kPa and 200°C. At this moment, both the inlet and the exit valves to the radiator are closed. After a while it is observed that the temperature of steam drops to 80°C as a result of heat transfer to the room air, which is at 21°C. Assume the surroundings to be at 0°C.
Determine the entropy change of the steam during this process.
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “The radiator of a steam heating system has a volume of 35 L and is filled with superheated water vapor at 200 kPa and 200°C. At this ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
The velocity of a fluid flowing between 2 parallel plates is given as a function of the distance between the plates (y) by the equation: u = 1/2 y^2. The gap between the plates is h, and the width of the plates is b.
Answers (1)
Considering a closed, stationary, rigid container with certain gas inside, the total mass of the gas is 2 kg, and a heating process goes from state 1 with internal energy 100 kJ/kg to state 2 with internal energy 200 kJ/kg.
Answers (1)
A cylindrical shell of inner and outer radii, ri and ro, respectively, is filled with a heat-generating material that provides a uniform volumetric generation rate (W/m3) of Qdot.
Answers (1)
Air undergoes a constant pressure process from 300K to 500K in a piston cylinder. Determine the heat transfer for this process in [kJ/kg). You may assume that air behaves as an ideal gas with constant specific heats.
Answers (1)
Firms are able to price discriminate A. when all customers are uninformed about quality differences. B. when there is full information about quality available to all customers. C. when some customers are uninformed about quality differences. D.
Answers (1)
New Questions in Engineering
There are six items to be rung up in the cash register. The first item costs $15.00. Each item after that costs an additional $2.00. (item #2 costs $17, item #3 costs $19, etc.
Answers (1)
List and briefly describe two modern's materials needs
Answers (1)
Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.
Answers (1)
How are fluids distributed and transported in a fluid power system?
Answers (1)
The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.
Answers (1)