Engineering

27 August, 21:17

A 13-L kerosene tank (ρ = 820 kg/m3) is filled with a 2-cm-diameter hose equipped with a 1.5-cm-diameter nozzle meter. If it takes 18 s to fill the tank, determine the pressure difference indicated by the nozzle meter. The pressure difference indicated by the nozzle meter is kPa.

+3

Answers (1)

Know the Answer?

Not Sure About the Answer?

Find an answer to your question 👍 “A 13-L kerosene tank (ρ = 820 kg/m3) is filled with a 2-cm-diameter hose equipped with a 1.5-cm-diameter nozzle meter. If it takes 18 s to ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.

Search for Other Answers

You Might be Interested in

Analyze the following recursive method. public static long factorial (int n) { return n * factorial (n - 1); } A. Invoking factorial (0) returns 0. B. Invoking factorial (1) returns 1. C. Invoking factorial (2) returns 2. D.

Burn rate can be affected by: A. Variations in chamber pressure B. Variations in initial grain temperature C. Gas flow velocity D. All of the above

Can someone draw a electric circuit with electrical symbols for this "In the hall there is one light bulb that can be turned on and off at both ends of the room and an electric bell.

Brittle failure is a type of failure in which: (a) There is large amount of plastic deformation (b) Large amount of elastic deformation (c) Very little plastic and elastic deformation (d) None of the above

Consider the following grooves, each of width W, that have been machined from a solid block of material. (a) For each case obtain an expression for the view factor of the groove with respect to the surroundings outside the groove.

New Questions in Engineering

Work done by a system during a process can be considered as a property of the system. a) True b) False

When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.

hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.

10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both

What is the definition of diameter pitch?