3. An isolated system has an initial temperature of 30oC. It is then placed on top of a Bunsen burner whose temperature is 70oC for an hour. What is the final temperature? Explain. [25]

If high beam headlights are used improperly, it could cause glare for an oncoming driver or reduce their visibility greatly, increasing the possibility of a collision. a) b) True False

Which of the following statements do not correctly describe pull manufacturing? (1). Material flow is determined by the need of the downstream workstation (2). Control is transferred from the beginning of the line to the end (3).

9. A beginning service technician earns $400 per week. How much should the technician spend on vehicle payment? a. $400 per month b. $500 per month c. $800 per month d. $1000 per month 10.

3-kg plastic tank that has a volume of 0.2 m3 is filled with liquid water. Assuming the density of water is 1000 kg/m3, determine the weight of the combined system.

A 6x50 mm flat alloy bar clongates 1.22 mm in a length of 1.5 m under a total axial load of 35.0 NThe proportional limit of this alloy is 300 MPa Determine: '.50" 35 kN 35 kN 6 x 50 A. The axial stress in the bar. B.

List and briefly describe two modern's materials needs

Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.

How are fluids distributed and transported in a fluid power system?

The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.

Two parallel Rivers (A and B) are separated by confined and unconfined aquifer estimate the RATE of seepage of river A to River B per unit length of the rivers