1. When your brakes fail, first try __.

A. pumping the brake pedal

B. holding the brake pedal down

C. pressing the accelerator

D. kicking the brake pedal

A rectangular beam is 14 in. wide and has an effective depth of 20.5 in. The beam contains No. 3 (No. 10) stirrups spaced at 9 in. For f c = 3000 psi and f yt = 60,000 psi, calculate the nominal shear capacity of the section.

An automobile has a history of radiator leaks due to corrosion. The same car was found to have engine failure due to overheating that increased with the age of the vehicle. This is an example of: (a.) Classical component failure (b.

State a characteristic required for identification of ASD. * *HINT: There are two specific characteristics required - make sure you find these and use them* * Describe how deficits in this area cause a problem functioning/participating in the

You just purchased a 400-L rigid tank for a client who works in the gas industry. The tank is delivered pre-filled with 3 kg of air at a temperature of 25C.

During casting and solidification, shrinkage includes: a) - Liquid contraction during cooling prior to solidification. b) - Contraction during the phase change from liquid to solid. c) - Thermal contraction during cooling to room temperature.

List and briefly describe two modern's materials needs

Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.

How are fluids distributed and transported in a fluid power system?

The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.

Two parallel Rivers (A and B) are separated by confined and unconfined aquifer estimate the RATE of seepage of river A to River B per unit length of the rivers