1. Technician A says that an automotive

technician must be a "jack-of-all-trades."

Technician B says that the technician's job is

seldom boring. Who is right?

(A) A only.

(B) B only.

(C) Both A and B.

(D) Neither A nor B.

onefits of

Products that are in the process of being manufactured but are not yet complete are called:

If you add 10 J of heat to a system so that the final temperature of the system is 200K, what is the change in entropy of the system? a) - 0.05 J/K b) - 0.30 J/k c) - 1 J/K d) - 9 J/K e) - 2000 J/K

Two loads connected in parallel draw a total of 2.4 kW at 0.8 pf lagging from a 120-V rms, 60-Hz line. One load absorbs 1.5 kW at a 0.707 pf lagging. Determine: (a) the pf of the second load, (b) the parallel element required to correct the pf to 0.

B. Is the "Loading Time" of any online application a functional or a non-functional requirement? Can the requirement engineers specify this property before the system is actually implemented, how?

Why does a BJT transistor require detailed calculations for its base resistor value to operate?

A car is towed into a shop with a no-start problem. The engine cranks but will not fire and run on its own power. The car has a throttle body, fuel injected gasoline engine. Technician (A) says to check for spark and fuel first.

2) How many intelligences did Dr. Howard Gardner propose that each person possesses? A) 4 B) 6 C) 8 D) 10

Assign courseStudent's name with Smith, age with 20, and ID with 9999. Use the printAll () member method and a separate println () statement to output courseStudents's data. Sample output from the given program: Name: Smith, Age: 20, ID: 9999

Which renewable sources are growing at the fastest rate? Which renewable source is used to produce most electricity?

Air is compressed in the compressor of a turbojet engine. Air enters the compressor at 270 K and 58 kPa and exits the compressor at 465 K and 350 kPa. Take the average specific heat at constant pressure (cp, avg) of air as 1.015 kJ / kg.