The weight of the frame body and engine supported by the springs is called what
A unsprung weight
B supported mass
C sprung weight
D static weight
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “The weight of the frame body and engine supported by the springs is called what A unsprung weight B supported mass C sprung weight D static ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
An air-conditioning system is used to maintain a house at 70°F when the temperature outside is 100°F. The house is gaining heat through the walls and the windows at a rate of 800 Btu/min, and the heat generation rate within the house from people,
Answers (2)
A dog-bone test sample with an area of. 235 in2 is subjected to a force of 4,000 lbs. Which of the following could be calculated based on this information? A.) Strain B.) Modulus of Elasticity C.) Change in volume D.) Stress
Answers (1)
A ball bearing has been selected with the bore size specified in the catalog as 35.000 mm to 35.020 mm. Specify appropriate minimum and maximum shaft diameters to provide a locational interference fit.
No Answers
Describe the factors that contribute to a disk drive's average access time. Which of these factors is improved if the spin rate is increased? Which is improved if areal density is increased?
Answers (1)
Which substance (s) have no fixed shape and no fixed volume?
Answers (2)
New Questions in Engineering
The Reynolds number, rhoVD/μ is a very important parameter in fluid mechanics. Determine its value for ethyl alcohol flowing at a velocity of 4 m/s through a 2-in.-diameter pipe.
Answers (1)
Work done by a system during a process can be considered as a property of the system. a) True b) False
Answers (1)
When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.
Answers (2)
hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.
Answers (1)
10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both
Answers (2)