Ask Question
15 November, 00:09

5. Bar stock of initial diameter = 90 mm is drawn with a draft = 10 mm. The draw die has an entrance angle = 18, and the coefficient of friction at the work die interface = 0.08. The metal behaves as a perfectly plastic material with yield stress = 105 MPa. Determine (a) area reduction, (b) draw stress, (c) draw force required for the operation, and (d) power to perform the operation if exit velocity = 1.0 m/min.

+2
Answers (1)
  1. 15 November, 00:11
    0
    a) 0.2099

    b) 46.5 MPa

    c) 233765 N

    d) 3896 W

    Explanation:

    a)

    r = (A'' - A') / A'', where

    A'' = 1/4 * π * D''²

    A'' = 1/4 * 3.142 * 90²

    A'' = 6362.55 mm²

    D' = D'' - d = 90 - 10 = 80 mm

    A' = 1/4 * π * D'²

    A' = 1/4 * 3.142 * 80²

    A' = 5027.2 mm²

    r = (A'' - A') / A'

    r = (6362.55 - 5027.2) / 6362.55

    r = 1335 / 6362.55

    r = 0.2099

    b)

    Draw stress = σd

    Y' = k = 105 MPa

    Φ = 0.88 + 0.12 (D/Lc), where

    D = 0.5 (90 + 80) = 85 mm

    Lc = 0.5 [ (90 - 80) / sin 18] = 16.18 mm

    Φ = 0.88 + 0.12 (85/16.18) = 1.51

    σd = Y' * (1 + μ/tan α) * Φ * In (A''/A')

    σd = 105 * (1 + 0.08/tan18) * 1.51 * In (6362.55/5027.2)

    σd = 105 * 1.246 * 1.51 * 0.2355

    σd = 46.5 MPa

    c)

    F = A' * σd

    F = 5027.2 * 46.5

    F = 233764.8 N

    d)

    P = 233764.8 (1 m/min)

    P = 233764.8 Nm/min

    P = 3896.08 Nm/s

    P = 3896.08 W
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “5. Bar stock of initial diameter = 90 mm is drawn with a draft = 10 mm. The draw die has an entrance angle = 18, and the ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers