Both 1042 steel and 4340 steel are used commercially to make quenched round bars of about the same diameter, such as 1 in. Often, these are fully quenched. Referring to your discussion in 5, give an example of a product for which a steel like 1042 would be preferred, and one for which 4340 or a similar material would be chosen. Explain the reason for the selection of the material in each case
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Both 1042 steel and 4340 steel are used commercially to make quenched round bars of about the same diameter, such as 1 in. Often, these are ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Liquid flows at steady state at a rate of 2 lb/s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. The liquid specific enthalpy at the inlet is 40.09 Btu/lb and at the exit is 40.94 Btu/lb.
Answers (1)
The resultant of two forces p and q is 260N. if q is 80N and the angle between p and q is 30° find q
Answers (1)
In 1903, Aegidius Elling of Norway designed and built an 11-hp gas turbine that used steam injection between the combustion chamber and the turbine to cool the combustion gases to a safe temperature for the materials available at the time.
Answers (1)
A 380-L tank contains steam, initially at 500oC, 3 bar. A valve is opened for 10 seconds and steam flows out of the tank at a constant mass flow rate of 0.005 kg/s. During steam removal, a heater maintains the temperature within the tank constant.
Answers (1)
Indicate whether the following statements are true or false for a reversible process: (A) Q=0. (B) Work may be calculated using the equation of state. (C) The total entropy change of the system and the surroundings is zero.
Answers (1)
New Questions in Engineering
List and briefly describe two modern's materials needs
Answers (1)
Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.
Answers (1)
How are fluids distributed and transported in a fluid power system?
Answers (1)
The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.
Answers (1)
Two parallel Rivers (A and B) are separated by confined and unconfined aquifer estimate the RATE of seepage of river A to River B per unit length of the rivers
Answers (1)