What are the functions of a gear

A certain well-graded sand deposit has an in-situ relative density of about 50%. A laboratory strength test on a sample of this soil produced an effective friction angle of 31.

1. (5 pts) An adiabatic steam turbine operating reversibly in a powerplant receives 5 kg/s steam at 3000 kPa, 500 °C. Twenty percent of the flow is extracted at 1000 kPa to a feedwater heater and the remainder flows out at 200 kPa.

Motor control circuit conductors that extend beyond the motor control equipment enclosure shall have short- circuit and ground-fault protection sized not greater than percent of the value specified in Table 310.15 (B) (16) for 602 C conductors. O a.

How does the invention of electrical lights and automobiles impact the world today? Explain. (1 paragraph minimum)

What are the effects of applying an additional layer of insulation to a cylindrical pipe or a spherical shell?

List and briefly describe two modern's materials needs

Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.

How are fluids distributed and transported in a fluid power system?

The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.

Two parallel Rivers (A and B) are separated by confined and unconfined aquifer estimate the RATE of seepage of river A to River B per unit length of the rivers