Under which of the following conditions is a Type B-1 Fire extinguisher required onboard a motorized vessel?
A
The vessel does not have any closed compartments
B
The vessel does not have an installed fuel tank
The vessel has met the life jacket requirements
D
The vessel has closed living spaces onboard
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Under which of the following conditions is a Type B-1 Fire extinguisher required onboard a motorized vessel? A The vessel does not have any ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Which of the following are not related to a materials structure? (Mark all that apply) a) - Atomic bonding b) - Crystal structure c) - Atomic number d) - Microstructure
Answers (1)
A 13-L kerosene tank (ρ = 820 kg/m3) is filled with a 2-cm-diameter hose equipped with a 1.5-cm-diameter nozzle meter. If it takes 18 s to fill the tank, determine the pressure difference indicated by the nozzle meter.
Answers (1)
Which branch of engineering studies the physical behavior of metallic elements? A. aerospace engineering B. textile engineering C. materials engineering D. pharmaceutical engineering
Answers (1)
Define the stress and strength? A material has yield strength 100 kpsi. A cantilever beam has length 10 in and a load of 100 Lbf is applied at the free end. The beam cross section is rectangular 2""x5'.
Answers (1)
A ball bearing has been selected with the bore size specified in the catalog as 35.000 mm to 35.020 mm. Specify appropriate minimum and maximum shaft diameters to provide a locational interference fit.
No Answers
New Questions in Engineering
There are six items to be rung up in the cash register. The first item costs $15.00. Each item after that costs an additional $2.00. (item #2 costs $17, item #3 costs $19, etc.
Answers (1)
List and briefly describe two modern's materials needs
Answers (1)
Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.
Answers (1)
How are fluids distributed and transported in a fluid power system?
Answers (1)
The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.
Answers (1)