What is 90 to the power of 46

A 100 ft long steel wire has a cross-sectional area of 0.0144 in. 2. When a force of 270 lb is applied to the wire, its length increases by 0.75 in. Determine: a. The stress (precision of 1000) b. The strain (precision of 0.00000) c.

What is the first ability affected by alcohol.

Create an application named NumbersDemo whose main () method holds two integer variables. Assign values to the variables. In turn, pass each value to methods named displayTwiceTheNumber (), displayNumberPlusFive (), and displayNumberSquared ().

Which of the following quenching materials is LEAST severe in its quenching action (slowest cooling) ? a. Air b. Brine c. Oil d. Water

Increase the sampling time by a factor of 10 (to 0.1 seconds), keeping the frequency of the square wave the same, and observe the delay. Discuss relationship between sampling time and delay from one board to another.

What is the most important function of any control system?

Why research and development in Maintenance Engineering?

The common-emitter current gains of two transistors are β = 60 and β = 150. Determine the corresponding common-base current gains. (b) The commonbase current gains of two transistors are α = 0.9820 and α = 0.9925.

Steam enters a turbine operating at steady state at 600°F and 200 lbf/in^2 with a velocity of 80 ft/s and leaves as saturated vapor at 5 lbf/in^2 with a velocity of 300 ft/s. The power developed by the turbine is 200 horsepower.

At steady state, a reversible heat pump cycle discharges energy at the rate to a hot reservoir at temperature TH, while receiving energy at the rate from a cold reservoir at temperature TC.