Ask Question
EngineeringEngineering
31 July, 13:44

How does the CNC machine work in product design?

+5
Answers (1)
  1. 31 July, 13:57
    0
    Answer:CNC machining is a manufacturing process in which pre-programmed computer software dictates the movement of factory tools and machinery. The process can be used to control a range of complex machinery, from grinders and lathes to mills and routers
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “How does the CNC machine work in product design? ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
3. A storage tank is connected to a pond (at atmospheric pressure!) by a length of 4" pipe and a gate valve.
Answers (1)
Calculate the pressure drop in a duct (measured by a differential oil manometer) if the differential height between the two fluid columns is 3.2 cm and the density of oil is 860 kg/m3.
Answers (1)
Calculate the CSTR volume required for 98% degradation of an organic compound. The inflow rate into the reactor is 75 L/s, the contaminant concentration is 0.05 mol/L, and the degradation rate constant (K) is 0.10/s.
Answers (1)
Which of the following is/are not a cutting tool material (mark all that apply) ? a. High-speed steel b. Brass c. Coated carbide d. Diamond
Answers (1)
Burn rate can be affected by: A. Variations in chamber pressure B. Variations in initial grain temperature C. Gas flow velocity D. All of the above
Answers (1)
New Questions in Engineering
The Reynolds number, rhoVD/μ is a very important parameter in fluid mechanics. Determine its value for ethyl alcohol flowing at a velocity of 4 m/s through a 2-in.-diameter pipe.
Answers (1)
Work done by a system during a process can be considered as a property of the system. a) True b) False
Answers (1)
When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.
Answers (2)
hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.
Answers (1)
10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both
Answers (2)
Home » Engineering » How does the CNC machine work in product design?
Sign Up Forgot Password?