Ask Question
1 January, 22:47

One of my tools stopped working, and I found that in order to fix it, I need to replace a broken wire. The broken wire has a diameter of 5mm and a length of 15 cm. When it was connected to the battery, a current of 12.5mA flowed through the wire. The only wire that I have at home is the same material, but has a diameter of 2mm.

a) If I replace the broken piece of wire with a 15cm length of my 2mm diameter wire, what will happen to the current (increase or decrease) ?

What is the value of the current through the new wire (assume that it's connected to the same battery as the original wire) ? Hint: Think about the resistances of the old and new wires.

b) How long should the new wire (2mm diameter) be if I want to ensure that the current passing through it is the same as the original wire (12.5mA) ?

+4
Answers (1)
  1. 1 January, 22:55
    0
    a) I₂ = 2 mA (The current has decreased)

    b) L₂ = 2.4 cm

    Explanation:

    Consider the old wire as wire 1 and the new wire as wire 2. The data that we have from the question is:

    Current through wire 1 = I₁ = 12.5 mA

    Diameter of wire 1 = d₁ = 5 mm

    Length of wire 1 = L₁ = 15 cm

    Cross-Sectional Area of wire 1 = A₁ = πd₁²/4 = π (5 mm) ²/4 = 19.63 mm²

    Diameter of wire 2 = d₂ = 2 mm

    Cross-Sectional Area of wire 2 = A₂ = πd₂²/4 = π (2 mm) ²/4 = 3.14 mm²

    a)

    Length of wire 2 = L₂ = 15 cm

    Since, the battery is same. Therefore, the voltage will be same for both wires.

    V₁ = V₂

    using Ohm's Law (V = IR)

    I₁R₁ = I₂R₂

    Since resistance of wire is given by formula: R = ρL/A

    Therefore,

    I₁ρ₁L₁/A₁ = I₂ρ₂L₂/A₂

    where,

    ρ = resistivity, and it depends upon material of wire and the material of both wires is same and the length of wires is also same.

    Hence, ρ₁ = ρ₂

    and L₁ = L₂

    and the equation becomes:

    I₁/A₁ = I₂/A₂

    I₂ = I₁A₂/A₁

    I₂ = (12.5 mA) (3.14 mm²) / (19.63 mm²)

    I₂ = 2 mA

    Thus, the current has decreased.

    b)

    In order to have same current the resistance of both wires must be same:

    R₁ = R₂

    ρ₁L₁/A₁ = ρ₂L₂/A₂

    Since, ρ₁ = ρ₂

    Therefore,

    L₁/A₁ = L₂/A₂

    L₂ = L₁A₂/A₁

    L₂ = (15 cm) (3.14 mm²) / (19.63 mm²)

    L₂ = 2.4 cm
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “One of my tools stopped working, and I found that in order to fix it, I need to replace a broken wire. The broken wire has a diameter of ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers