Electrical arcing occurs when

4. A 1 m3 rigid tank has propane at 100 kPa, 300 K and connected by a valve to another tank of 0.5 M3 with propane at 250 kPa, 400 K. The valve is opened and the two tanks come to a uniform state at 325 K. What is the final pressure?

A car moves along a circular track of radius 250 ft such that its seed for a short period of time 0<_ t <_ 4s, is v = 3 (t - t^2) ft/s, where t is in seconds. a. Determine the magnitude of its acceleration when t = 3s. b.

Consider the mixing of 0.8 kg/s of hot water at 348 K and 1 kg/s of cool water at 298 K that is generating warm water. Assume no work is being done and the system is in steady state, but heat is lost at the rate of 30 kJ/s during this mixing.

Problem 2 (a) A sinusoid with a frequency of 2Hz is applied to a sampler/zero-order hold combination. The sampling rate is 10Hz. List all the frequencies present in the output that are less than 50Hz.

Define coordination number. How does this differ from atomic packing factor?

Work done by a system during a process can be considered as a property of the system. a) True b) False

When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.

hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.

10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both

What is the definition of diameter pitch?