Why is it reasonable to say that no system is 100% efficient?
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Why is it reasonable to say that no system is 100% efficient? ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Which examples demonstrate tasks commonly performed in Maintenance/Operations jobs? Check all that apply. 1. Ross fixes a dishwasher for a homeowner. 2. Beverly operates heating and air-conditioning equipment in an office building. 3.
Answers (2)
5. Bar stock of initial diameter = 90 mm is drawn with a draft = 10 mm. The draw die has an entrance angle = 18, and the coefficient of friction at the work die interface = 0.08.
Answers (1)
two forces act at 60 degrees and their resultant is 14 neutons, if they act at 90 degrees their resultant is 90 degrees. find the mangitude of forces?
Answers (1)
What is the difference between the Otto and Diesel engine?
Answers (1)
A strain gage is mounted at an angle of 30° with respect to the longitudinal axis of the cylindrical pressure. The pressure vessel is fabricated from aluminum [E = 10,000 ksi; ν = 0.33], and it has an inside diameter of 54 in.
Answers (1)
New Questions in Engineering
Which of the following elements of the CIA triad refers to maintaining and assuring the accuracy of data over its life-cycle? Confidentiality Integrity Availability Authentication
Answers (1)
According to the video, what are some of the effects of the increase in the use of automated tools for Loading Machine Operators? Check all that apply.
Answers (2)
A gas flows through a one-inlet, one-exit control volume operating at steady state. Heat transfer at the rate takes place only at a location on the boundary where the temperature is Tb.
Answers (1)
An uncharged capacitor and a resistor are connected in series to a source of voltage. If the voltage = 7.41 Volts, C = 11.5 µFarad, and R = 89.
Answers (1)
The convection heat transfer coefficient for a clothed person standing in moving air is expressed as h 5 14.8V0.69 for 0.15, V, 1.5 m/s, where V is the air velocity. For a person with a body surface area of 1.
Answers (1)