Ask Question
EngineeringEngineering
6 November, 01:45

What are primary and secondary super-heaters?

+2
Answers (1)
  1. 6 November, 01:49
    0
    Superheater has two types of parts which are:

    The primary super-heater The secondary super-heater

    Primary super-heater is first heater which is passed by the steam after steam comes out of steam drum.

    After steam is heated on super primary heater, then the steam is passed on secondary super-heater so to be heated again. Thus, on secondary super-heater, the steam formed is hottest steam among others.

    Steam from secondary super-heater which becomes the superheated steam, flow to rotate the High-Pressure Turbine.
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “What are primary and secondary super-heaters? ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
The job objective on your resume should be vague so as to leave all of your options open. Is this statement true or false? true false
Answers (1)
What is your employer required to have on fixed ladders that extend more than 24 feet in the workplace?
Answers (2)
Meira is interested in getting money to buy a house. Which workplace would give her the best chance of obtaining that money? a bank an insurance company the stock market a tax preparation office
Answers (2)
All electrochemical batteries have three major parts two electrodes or plates and an electrolyte?
Answers (1)
Webster is giving a speech on the benefits of moving toward the use of windmill energy instead of having to rely on fossil fuels. Most likely, he will select which method of arrangement?
Answers (1)
New Questions in Engineering
Which of the following elements of the CIA triad refers to maintaining and assuring the accuracy of data over its life-cycle? Confidentiality Integrity Availability Authentication
Answers (1)
According to the video, what are some of the effects of the increase in the use of automated tools for Loading Machine Operators? Check all that apply.
Answers (2)
A gas flows through a one-inlet, one-exit control volume operating at steady state. Heat transfer at the rate takes place only at a location on the boundary where the temperature is Tb.
Answers (1)
An uncharged capacitor and a resistor are connected in series to a source of voltage. If the voltage = 7.41 Volts, C = 11.5 µFarad, and R = 89.
Answers (1)
The convection heat transfer coefficient for a clothed person standing in moving air is expressed as h 5 14.8V0.69 for 0.15, V, 1.5 m/s, where V is the air velocity. For a person with a body surface area of 1.
Answers (1)
Home » Engineering » What are primary and secondary super-heaters?
Sign Up Forgot Password?