Sign In
Ask Question
Aidyn Morrow
Engineering
4 March, 15:36
What is the slump test
+5
Answers (
1
)
Mark Ramsey
4 March, 15:56
0
Slump Test
Explanation:
1. The slump test is a means of assessing the consistency of fresh concrete. It is used, indirectly, as a means of checking that the correct amount of water has been added to the mix.
2. Concrete slump test is carried out from batch to batch to check the uniform quality of concrete during construction. The slump test is the most simple workability test for concrete, involves low cost and provides immediate results. Due to this fact, it has been widely used for workability tests since 1922.
3. Slump test is the most commonly used method of measuring consistency of concrete which can be employed either in laboratory or at site of work ... In case of a shear slump, the slump value is measured as the difference in height between the height of the mould and the average value of the subsidence.
Comment
Complaint
Link
Know the Answer?
Answer
Not Sure About the Answer?
Find an answer to your question 👍
“What is the slump test ...”
in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Technician A says that as wheelbase becomes shorter in a highway truck, its resistance to yaw is reduced. Technician B says that an ABS add-on called directional stability control uses the brake system to avoid tracking yaw. Who is correct?
Answers (1)
Three intermittent switches A; B; C are in a box. Switches A; B and C work 75%, 50% and 25% of the time, respectively. Suppose switches are selected with equal probability from the box.
Answers (1)
5.46 By supplying energy at an average rate of 24,000 kJ/h, a heat pump maintains the temperature of a dwelling at 20°C. If electricity costs 8.
Answers (1)
A person is attempting to start a 20hp diesel engine with a hand crank. The distance from the handle to the center of rotation is 12 inches. The person is able to apply 25 lbf tangent to the circular path of the handle.
Answers (1)
A scrubber on a coal-fired power plant is useful to remove a. sulfur dioxide. b. carbon dioxide. c. particulate matter.
Answers (2)
New Questions in Engineering
What are the three basic components of a limit switch
Answers (1)
If a law enforcement officer stops a vehicle for a traffic violation and finds a front-seat passenger 18 years of age or older not wearing a safety belt, a safety belt violation will be charged to: The front-seat passenger Neither the driver nor the
Answers (1)
The input power for a thermostat is wired to the A. R b. G c. W d. Y
Answers (1)
What standard feature is on all circular saws? 1. Blade guard 2. Blade-height adjustment 3. Angle-of-cut adjustment 4. All of the above
Answers (1)
Write a program that prints, line by line, the numbers from 1 to 100. For multiples of three print the word "Cow" instead of the number and for the multiples of seven print "Pie" instead of the number.
Answers (1)
Home
»
Engineering
» What is the slump test
Sign In
Sign Up
Forgot Password?