Suppose a person (height of 1.8 m) walks in a room installed with a pyroelectric infrared (PIR) motion detector. The distance between the person and the PIR detector is 5 m. The PIR detector sensor is 3 cm x 1 cm in size.
Estimate the radiated power at the surface of the sensor from the person. Assume that emissivity of human skin/fabric and sensor cap is 0.9. Assume that the person's body temperature is 37°C and the temperature at the surface of PIR detector is at 18°C. Also assume that there is no radiated power loss through air and Fresnel lens. You can roughly estimate surface area of the person.
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Suppose a person (height of 1.8 m) walks in a room installed with a pyroelectric infrared (PIR) motion detector. The distance between the ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
What is the importance of stairs and post of the house?
Answers (2)
Low-level coding means that ... a.) a component item is coded at the lowest level at which it appears in the BOM structure b.) a final item has only a few levels in the BOM structure c.
Answers (1)
Define various optical properties of engineering materials
Answers (1)
Two resistors, with resistances R1 and R2, are connected in series. R1 is normally distributed with mean 65 and standard deviation 10, and R2 is normally distributed with mean 75 and standard deviation 5. a. What is the probability that R2 > R1?
Answers (1)
Firebrick is referred to as "common brick" because it is the most commonly used type of brick.
Answers (1)
New Questions in Engineering
Work done by a system during a process can be considered as a property of the system. a) True b) False
Answers (1)
When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.
Answers (2)
hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.
Answers (1)
10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both
Answers (2)
What is the definition of diameter pitch?
Answers (1)