In measuring what does NEST stand for?

Liquid water enters an adiabatic piping system at 15°C at a rate of 8kg/s. If the water temperature rises by 0.2°C during flow due to friction, the rate of entropy generation in the pipe is?

Give two circumstances in which in situ treatment would be better, and two in which ex situ treatment would be better. Both using chemical oxidation as the remediation technique.

If you put a straw into a glass of water, the straw looks bent, although nothing has really happened to the straw. The term that describes this property of light is

What is the magnitude of the maximum stress that exists at the tip of an internal crack having a radius of curvature of 5 * 10-4 mm (1.969 * 10-5 in.) and a crack length of 4.5 * 10-2 mm (1.772 * 10-3 in.

The concentration of carbon monoxide (co) in an exhaust gas is 1x10^4 ppmv. what is the concentration in mg/m^3 at 25 and 1 atm

List and briefly describe two modern's materials needs

Write the definition of a method named add that receives a reference to a Scanner object associated with a stream of input consisting of integers only. The method reads all the integers remaining to be read from the stream and returns their sum.

How are fluids distributed and transported in a fluid power system?

The sliders A and B are connected by a light rigid bar of length l = 20 in. and move with negligible friction in the slots, both of which lie in a horizontal plane. For the position where xA = 16 in., the velocity of A is vA = 3 ft/sec to the right.

Two parallel Rivers (A and B) are separated by confined and unconfined aquifer estimate the RATE of seepage of river A to River B per unit length of the rivers