An electric current is passed through a wire of 1 mm in diameter and 10 cm long. The wire is submerged in liquid water at atmospheric pressure, and the current is increased until the water boils. For this situation, the convection coefficient is 5000 W / (m²K), and the water temperature will be 100°C.
How much electric power must be supplied to the wire to maintain the wire surface temperature at 114°C?
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “An electric current is passed through a wire of 1 mm in diameter and 10 cm long. The wire is submerged in liquid water at atmospheric ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Give the characteristics for the material of friction surfaces.
Answers (1)
A cylindrical bar of metal having a diameter of 20.2 mm and a length of 209 mm is deformed elastically in tension with a force of 50500 N. Given that the elastic modulus and Poisson's ratio of the metal are 65.5 GPa and 0.
Answers (1)
Once an engineer has a sketch, the next step is to build the product. True or false
Answers (1)
Its an opinion! What is the difference between the commercial market and the consumer market for toilet paper?
Answers (1)
1. Which of these is NOT a common type of Camber/Caster adjuster? A. Wedges B. Cams C. Shims D. Slots
Answers (1)
New Questions in Engineering
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are95 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 7.2 MPa and thetemperature is 2150 K.
Answers (1)
Explain two Types of bearing?
Answers (1)
7 Single-use earplugs require a professional fitting before they can be used. A True B) False
Answers (2)
Electric power is to be generated by installing a hydraulic turbine-generator at a site 138 m below the free surface of a large water reservoir that can supply water at a rate of 2400 kg/s steadily. Determine the power generation potential.
Answers (1)
When the French horn plays with brass instruments, then it is played very softly to match the texture. True/False
Answers (1)