Sign In
Ask Question
Stephenson
Engineering
1 October, 04:34
How do nozzles aerosolize liquids?
+4
Answers (
1
)
Gunnar Meyers
1 October, 04:47
0
Since there's air inside the bottle, from the top, the liquid is forced up the tube when pushed. The mechanism forces some liquid out through the tube into a smaller nozzle that turns it into a high-speed aerosol of tiny droplets making sort of a mist
Comment
Complaint
Link
Know the Answer?
Answer
Not Sure About the Answer?
Find an answer to your question 👍
“How do nozzles aerosolize liquids? ...”
in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Which of the following statements most accurately describes the circuit? A. The Leonardo microcontroller will push 5V from pin 13 B. The resister drops the voltage from 5V to 3V so that the LED does not overheat C.
Answers (1)
The Reynolds number is a dimensionless group defined for a fluid flowing in a pipe as Re Durho/μ whereD is pipe diameter, u is fluid velocity, rho is fluid density, and μ is fluid viscosity.
Answers (1)
At steady state, a refrigerator whose coefficient of performance is 3 removes energy by heat transfer from a freezer compartment at 0 degrees C at the rate of 6000 kJ/hr and discharges energy by heat transfer to the surroundings, which are at 20
Answers (1)
What is the normal depth in a 4.5-foot wide rectangular channel that conveys a discharge of 185 cfs and has a bed slope of 4% with a Manning's roughness coefficient of 0.016?
Answers (1)
Why is it important that ironworkers wait to begin work until after cement masons are finished with their job? Cement is an important component of iron. For most buildings, iron is used to encase the cement.
Answers (1)
New Questions in Engineering
Work done by a system during a process can be considered as a property of the system. a) True b) False
Answers (1)
When the compression process is non-quasi-equilibrium, the molecules before the piston face cannot escape fast enough, forming a high-pressure region in front of the piston. It takes more work to move the piston against this high-pressure region.
Answers (2)
hypothetical A-B alloy of composition 40 wt% B-60 wt% A at some temperature is found to consist of mass fractions of 0.66 and 0.34 for the α and β phases, respectively.
Answers (1)
10. Which of these requires a wheel alignment after replacement? A. Struts B. Shocks C. Both
Answers (2)
What is the definition of diameter pitch?
Answers (1)
Home
»
Engineering
» How do nozzles aerosolize liquids?
Sign In
Sign Up
Forgot Password?