Students are expected to respond to one of the two questions described below. Students should provide examples to clarify their response.
1. Manufacturing systems may be classified into types, such as customized production, batch production, and continuous production. Describe examples of how each product type is applied; cite examples of products that are produced as customized, batch, and continuous.
2. The interchangeability of parts increases the effectiveness of manufacturing processes. Describe situations where parts are developed to be interchangeable and why this is important for industry.
Answers (1)
Know the Answer?
Not Sure About the Answer?
Find an answer to your question 👍 “Students are expected to respond to one of the two questions described below. Students should provide examples to clarify their response. ...” in 📗 Engineering if the answers seem to be not correct or there’s no answer. Try a smart search to find answers to similar questions.
Search for Other Answers
You Might be Interested in
Reducing embodied energy for bricks requires: Select one: a. no drying of bricks before firing. b. using cement instead of clay. c. including wood fibers in the mix. d. firing at a lower temperature. e. using fly-ash and steam curing.
Answers (1)
Consider a cylindrical nickel wire 2.3 mm in diameter and 2.6 * 104 mm long. Calculate its elongation when a load of 260 N is applied.
Answers (1)
List irreversibilities
Answers (1)
An orthogonal cutting operation is being carried out under the following conditions: depth of cut = 0.1 mm, width of cut = 5 mm, chip thickness = 0.2 mm, cutting speed = 1.5 m/s, rake angle = 15o, cutting force = 400 N, and thrust force = 200 N.
Answers (1)
The cost of fixing a fault for a software product identified during the implementation phase is approximated at $32,000 USD. How much would the same fault cost had it been identified and corrected during the analysis phase (approximate $ amount)
Answers (1)
New Questions in Engineering
Given an unsorted array of distinct positive integers A[1 ... n] in the range between 1 and 10000 and an integer i in the same range. Here n can be arbitrary large. You want to find out whether there are 2 elements of the array that add up to i.
Answers (1)
A hydraulic power unit is sometimes referred to as a?
Answers (1)
8.21 In the final stages of production, a pharmaceutical is sterilized by heating it from 25 to 75°C as it moves at 0.2 m/s through a straight thin-walled stainless steel tube of 12.7-mm diameter.
Answers (1)
Which of the following can improve your car's gas mileage? A. Equipment racks B. Cargo carriers C. Sports team flags D. Car aerodynamics
Answers (2)
Which of the following describes a logic bomb? a rogue piece of code in a system activates on a certain date a piece of code replaces the boot instructions the cookie tracker is exploited to note your browsing habits a piece of code hidden in a
Answers (1)